Laboratory Equipment Design and Manufacture
- Varible speed range 1000 to 2500 rpm.
- Hands free operation of mix depth
- All contact points in stainless steel
- Built in digital D.C. inverter
- Free standing or Bench mounted
- Fitted with all neccessary safety DEV
- Various mixer blades as required
This unit has been proven within the Paints, Ink and Plastic industries with many units working world wide for over 15 years.
Mix from 250ml to 5+ litres!
Designed for constant use and long life
Innovative Laboratory Equipment Design
5R. PT MK IV
Lab Machine
The MK IV is astep forward in print test equipment. Like its predecessors it has the facility to allow speed adjustment so as to as close as possible, mimic the operation of its full scale production relatives.
The new design is a step forward as the rollers are driven from one end rather than mounted at both ends as in previous designs.
Roller (1) is a smooth oscilating roller to help spread the product on to the bonded rubber Ghosting Roller (2). This roller is easily removed from its frame to allow easy application of product for cleaning.
Roller (3) is a polished roller (known as The Transfer Roller) this allows an even coating of the product when worked with rollers (1 +2).
Once fully coated the Transfer Roller is then moved over to the Print Roller (4). The movable framework allows the rubber bonded Ghosting Roller (2) to keep in contact with the Transfer Roller to prevent Ghosting of the Print Roller (4).
Once evenly wet the Transfer Roller (3) is retracted and the machine stopped.
The Mandrel Roller with the component is now brought into position, at an operator determined pressure. Adjusted by a lever stop.
The Inch Button is now pressed. This will revolve rollers (4+5) one revolution and the device will stop.
The design enables variable speed to rollers and pressure adjustment.
The unit is bench mounted and requires a 220/240 AC fused power supply.
Millership Engineering will require the following information to meet your requirements.
1) Internal diameter of test component.
2) The length of the test component.
We hope the description answers your enquiry, howerver,do not hesitate to contact us for further information.
Laboratory Mixer
Millership
ENGINEERING
Design / Manufacture & Procurement of
Specialist Machinery for Paint, Ink, Chemical & Food Industries
Design & Manufacture
